FA5–One/two-channel speed sensor difference-Hall in 2-hole flange design : NORIS Group GmbH

GC_Drehzahlsensoren_FAHZ5-FAHD5-FAHQ5_1024x768px

Typical application areas: shipbuilding (e.g., drive shafts and flywheels)
Particularly good price-performance ratio
Robust design for risk-free installation and harsh environmental conditions, high resistance against shock and vibration
Very high immunity to electromagnetic interference (EMI)
Robust design with high resistance to vibration and shock
Straight or lateral cable exit, available with cable protection system

Speed sensors of type FA5 are non-contacting 2-channel hall effect encoders with a stainless-steel sensor tube. This solution has been established on the market for a long time and has proven to be very effective in a wide range of applications.

The sensors are available with various output signals:

Type	Measuring principle	Output signals
FAHZ5	Difference-Hall	2 square wave signals, Q2 to Q1 by 90° phase shift
FAHS5	Difference-Hall	2 square wave signals, Q2 to Q1 90° phase shift, 1 status signal for rotational direction detection
FAHD5	Difference-Hall	2 square wave signals, Q2 to Q1 90° phase shift, signals galvanically isolated
FAHQ5	Difference-Hall	4 square wave signals, Q2 to Q1 90° phase shift, Q1_N and Q2N are inverted signals of Q1 and Q2

Supply voltage U_B	9 ... 32 VDC
Frequency range	0.2 ... 20,000 Hz
Measuring channels	According to the type: 2 measuring channels 2 galvanically isolated measuring channels 2 measuring channels plus status channel rotational direction
Output signals and signal form	Depending on the sensor type, cf. description
Scanning object	Ferromagnetic materials Toothed wheel: Module m1 to m3; tooth face width ≥ 7 mm (spur gear DIN867)
Distance scan object	0.2 ... 3 mm; recommended: 1.0 ± 0.5 mm
Operating temperature	-40 … +120°C
Degree of protection	Housing: IP66/IP68 Connection: IP66/IP68

Datasheet FA5

Instruction manual

Declaration of conformity

Type code structure
FA	H	Z	5-	11-	S	X	07-	M30-	S0	Example: FAHZ5-11-SX07-M30S0
	Measuring principle
		Measuring principle supplement
			Construction type and material
				Nominal length L1 of the sensor tube
					Connection outlet
						Electrical connection
							Cable length
								Module
									Shield

FAH[..]5 part code
Measuring principle	H	Difference-Hall
Measuring principle extension		Z	2 Output signals (voltage)
		D	2 Output signal (voltage), galvanically isolated
		S	2 Output signals (voltage) + status signal output for rotational direction detection
		Q	4 Output signals (voltage, 2 + 2 inverted)
Model and material			5-	Sensor tube, chromatised aluminium
Nominal length				11-	L1 = 29 mm
Connector output						No identifier: straight connector outlet
Connector output					S	Lateral connector output
Electrical connection						X	Standard cable end (without protective tube)
						XGS	Cable end, protective tube, reinforced with steel braiding
						XGT	Cable end, protective tube, reinforced with textile fibre braiding
						XP	Cable end, protective tube, polyamide
Jacket length							05-	Jacket length 2.0 m, halogen-free
							07-	Jacket length 5.0 m, halogen-free
							08-	Jacket length 7.5 m, halogen-free
							09-	Jacket length 10.0 m, halogen-free
Module								M10-	Module m1
								M12-	Module m1.25
								M15-	Module m1.5
									No identifier, Module m2
								M25-	Module m2.5
								M30-	Module m3
Shield										No identifier: Shield applied to sensor housing
Shield									S0	Shield applied to sensor housing
FA	_ _	_ _	_ _-	_ _-	_ _	_ _	_ _-	_ _-	_ _	Example: FAHZ5-11-X07

Customer-specific types

If you don’t find anything suitable among our standard types, we’ll be happy to develop a tailored solution with you to meet your requirements (-P types). They also meet the abovementioned standards thanks to our type-approved modular kits.